This release is a stable release that supersedes the 2.3.0.4 stable release. It contains all changes from the 2.3.1.0 and 2.3.1.1 beta releases. Breaking change: Locked-down data folder permissions This release hardens security around the data folder and is a breaking change for some setups. For most users, this should not be a problem as the folders should already have the correct permissions. Duplicati now requires that the data folder has the exact expected permissions, or it will refuse to use it. Previously, Duplicati would silently lock down the folder if it was not already locked. To opt out of the permission check, you need to either pass --allow-insecure-datafolder, set the environment variable DUPLICATI__ALLOW_INSECURE_DATAFOLDER=true, or place a file named insecure-permissions.txt in the installation folder. Note that the previous method of placing insecure-permissions.txt in the data folder is no longer supported. This change also applies to preload.json, such that it will only be loaded if the folder is trusted, or one of the opt-out methods are activated. Additionally, the previous trusted paths /usr/local/share/Duplicati/preload.json and C:\ProgramData\Duplicati\preload.json are no longer supported as they cannot be guaranteed to be locked down. A preload.json inside the data folder is still supported, provided the folder passes the permission check. The ConfigureTool has a new secure-datafolder command that can be used to force the correct permissions on the data folder. For most users this should not cause any problems, as Duplicati has been locking down the folder already, but if you rely on lax folder permissions the setup needs to change. Some Docker setups may not be able to set the permissions and will need to apply DUPLICATI__ALLOW_INSECURE_DATAFOLDER=true in the image to run without the protections.

Sync copy mode This release adds an often requested feature that enables simple copying of files from source to destination. Where the regular backups are deduplicated, compressed, encrypted and versioned, the new sync mode will instead simply copy from source to destination. The copy is currently a one-way sync, where the source is replicated on the destination. Files can be deleted on the destination during sync (use --sync-then-delete), but destination folders will not be deleted. The option --sync-remote-state is by default set to UseRemoteState which will list the destination and figure out what to upload. The setting UseLocalState uses a local database, similar to how backups work, to keep track of known remote files, and reduce the amount of remote listings done. Finally, the BlindlyUpload setting will just copy everything as-is to the remote. The sync jobs support remote sources, snapshots, and multiple destinations. If snapshots are enabled, the copy is done from the snapshot, ensuring reliable reads. Configuration of such a sync job is done the same way as with backup, but using a toggle option in the first step of the UI. Note that backup and sync jobs are not compatible as they use very different storage logic, so it is not possible to change the job mode after creating a job. CLI mode also supports sync.

Improved Windows installer This change brings a major update to the Windows installers, which now integrates the ability to run as a service, as well as generate and use TLS (https). The service feature has been present for a while in the WindowsService.exe tool and the TLS certificates were added as part of the Duplicati.CommandLine.ConfigureTool.exe. With this update these things are now integrated into the installer, and exposed as simple checkboxes to toggle the features. Installing the service from a regular user account, will also auto-generate a secure password and configure the TrayIcon to connect to the service (only for the current user). If you have installed the service manually, do not activate the new checkbox as it only works if there is no pre-existing service. The installer-driven service does not support commandline arguments directly, but instead prefers preload.json files to configure it. The MSI supports the property INSTALL_PRELOAD=true which will cause it to pick up a preload.json file from the same folder the MSI is located in. The Windows service is now also configured as delay-start service to avoid startup issues on boot.

Live reporting module This release adds a new live-reporting module that sends the current progress of backups to a user-specified URL. The intention is that this can be used for dashboards that want to show the current progress for backups. By default, the module is not configured and has no impact. The module supports multiple activity targets and includes metadata in the activity report, as well as a console-provided activity URL.

PAR2 parity / error-correction for remote volumes This release adds a pluggable parity module that produces error-correction data for remote data volumes, so they can be repaired after bit-rot or corruption on the backend, thanks @JamBalaya56562. To enable this, ensure that par2 is installed on the machine and set --parity-module=par2. Setting this will cause additional .par2 files to be uploaded.

Store configuration with backup This release revives the store-task-config option and makes it enabled by default for encrypted backups. The backup configuration is stored with the backup data, making it easier to restore a configuration later. For unencrypted backups, no secrets are stored by default. The behavior can be customized with options to store none, self, or all configurations, with or without secrets. The UI has been updated to allow restoring from the destination config. If multiple configurations are found, the user can select one or more backup configurations to restore.

MS365 subsites and shared mailboxes This release improves the Microsoft 365 backup support with two additions. Support for backing up SharePoint subsites has been added, making it possible to include sub-sites beneath a site collection in a backup. The handling of shared mailboxes has also been improved, with better detection and enumeration of shared mailboxes within a tenant. The license counting has been simplified. A Duplicati license is now required if an MS365 license is assigned, without needing per-user lookups. The same logic applies to both users and sites, and personal sites of users without a license are not counted. Filtering based on classification is still supported.

Full disk backup support (Windows, Linux, MacOS) This release extends the full disk backup feature to support Linux and MacOS, in addition to Windows. The Linux support allows backup and restore of entire disks on Linux, including partition tables. The MacOS support adds basic backup and restore of entire disks, including partition tables. Partition-level backup and restore is now supported, making it possible to select individual partitions as backup sources, or restore a single partition from a full disk backup to a different partition. Like the Office 365 / Google Workspace backup features, this is a proprietary module (source available). Full disk backup requires administrative privileges to access the disk directly. Full disk restore requires administrative privileges and requires that the disk is unmounted and not write-protected.

Desktop notifications on all platforms Desktop notifications are now supported on all platforms. Windows toast notifications have been implemented with click-to-open support, and native notification support has been added for macOS and Linux (via DBus), thanks @JamBalaya56562 for the Windows implementation.

Restore reliability improvements Several issues with the restore process have been fixed. Restores now properly respond to stop/abort requests, file reads and writes can be interrupted, and a critical bug with wrong seek offsets for partial blocks has been fixed, which could cause restores to fail, thanks @JamBalaya56562. An index has been added on the restore file table join columns for better restore performance, thanks @JamBalaya56562.

Misconfigured filter detection A new warning system detects when filters are configured to unconditionally exclude everything. A post-backup check also warns if no files were examined during backup, which helps catch misconfigurations that would otherwise silently produce empty backups.

New backends Added support for Drime Cloud as a new storage backend. Added a new backend for the Spanish provider Movistar, thanks @redmars27. The backend is marked as "untested" as it can only be used (and tested) by Movistar customers.

Deprecated backends The previous "SharePoint" and "OneDrive for Business" backends have been marked as deprecated, as Microsoft shut down the API they were calling. The migration step is to use the "SharePoint v2" backend (renamed to just "SharePoint" in this version) which uses the Microsoft Graph API.

Duplicati Storage This release includes Duplicati Storage which is integrated with the Duplicati console. Once a machine is connected to the console it can use the account's storage allocations with zero configuration required.

SharpAESCrypt v3 Updated the SharpAESCrypt encryption library to support "AES Crypt Stream Format v3", which has a number of improvements over the v2 format. For this release, the default written format remains v2, but we encourage you to set the environment variable DUPLICATI__AES_VERSION=3 to test the new format. Note: if you set this version to 3, the new remote volumes cannot be read by Duplicati versions older than 2.3.0.101.

Support for MacOS ACLs This release adds support for reading MacOS attributes and ACL strings during backup, and restoring them when permission restores are selected.

Support for Windows Alternate Data Streams